|
WASTE
HANDLING SYSTEM - Model #WHS-2006
We
designed and built our state of the art Waste Systems to
provide large restaurants, cafeteria facilities, medical
centers and many other clients with a lower cost
alternative to the common 'pulper" or disposers, for
waste handling and/or removal.
The
most common complaints about PULPERS are:
-
They
are very noisy and generate significant
vibration.
-
Special
consideration is needed to sound protect other
areas.
-
Very high purchase expense.
-
Large and difficult to clean under any
circumstance.
-
Volume
of waste is reduced - but the resulting mulch is VERY
HEAVY and dish room
employees struggle to move and handle the containers
increasing workplace injury risk.
-
Constant
repairs to parts like cutting blades are VERY
expensive.
-
The
circulating water in the waste trough is
"icky".
-
The
machine is DANGEROUS
and requires multiple "safety locks".
-
One
pulper user commented: "it
didn't reduce our waste treatment discharge fee from
the municipality at all"
Because
of these complaints we designed
the WHS-2006 Systems to have these value
engineered qualities:
-
The
machine is virtually SILENT!
-
The
machine is very simple to operate and very simple to
clean.
-
The
re-circulated water in the waste trough is 90% cleaner
than pulpers.
-
The
machine does not grind the waste to worthless mulch
that has no value. **
-
The
footprint is considerably less than a
typical 'pulper'.
-
The
purchase expense is one half the cost of
a typical pulper.
-
There
is little or no detectable vibration.
-
There
are few parts and no elaborate safety's are required.
-
Cost
of normal use repair and maintenance is negligable.
**
BIO-FUEL
technologies and research are increasing in the number of
facilities and methods to make use of food wastes previously
considered to only have value for composting
operations.
|
